Canon EOS 5D Mark II EVO
The Canon EVO collection is a forward-looking development on the DSLR camera market. In order to realize this, large modifications of the stock canon-camera had to be done. The originally used sensor-block will be replaced by a new custom made sensor-block, so that the camera-body just contains the electronics.
The sensor-block, the PL54-Mount and the support bracket are building a statically determined unit. In order to avoid a wrong flange depth caused by temperature, the sensor-block is made of a special steel, a material with a super low coefficient of expansion, which is also used in space technology. The PL and PANAVISION Mount and the sensor-block are positively tied with a support-bracket, which is made of heavy-duty aluminium (constructal), manufactured from solid material as used in aircraft construction. At the bottom of the support bracket there is one 3/8“ thread to mount the camera and 4 srews to take the load off the camera body. The shutter-unit remains in the camera. For that reason, still-photography in Manual Exposure Mode is still possible, by using Live View to focus.
In order to start the camera remote-controlled, a 3-pin Fischer plug has been built in, so that CMOTION, ARRI and other accessories can also be used. It is still possible to activate the Start/Stop – function by IR – remote control.
The Canon EVO collection is THE professional solution. The flange depth of 52,00 mm can also be controlled and adjusted, if necessary.
We recommend to use the Carl Zeiss CP2 lenses with PL54, except of the 18mm!
Any questions regarding this product?
Tel: +49 89 629866-0
CMOS-Sensor - 36x24mm
Pixel effective - 21,1 Megapixel
Prozessor - Digic 4
ISO-Sensibility - 100 - 6.400, erweiterbar: 25.600
LCD-Monitor - 3,0 Zoll (7,6cm), TFT 920.000 Pixel, non reflecting
Filmtyp - MOV H.264
Filmgröße - 24, 25 and 30 fps progressive (1920x1080) 50 and 60 fps progressive (1080x720)
Filmlänge - 29Min. 59 Sek.