Canon EOS 7D EVO
The Canon EVO collection is a trend-setting development on the DSLR camera market. All 35mm lenses fitted with PL and PANAVISION mount can be used with the three Canon EVO cameras. In order to realize this, large modifications of the stock canon-camera had to be done. The originally used sensor-block will be replaced by a new custom made sensor-block, so that the camera-body just contains the electronics.
The sensor-block, the PL54-Mount and the support bracket create a statically determined unit. In order to avoid a wrong flange depth caused by temperature, the sensor-block is made of a special steel, a material with a very low coefficient of expansion, also used in the space industry. The PL and PANAVISION mounts and the sensor-block are connected with a support-bracket, which is made of heavy-duty aluminium (constructal), as used in aircraft industry. At the bottom of the support bracket there is a 3/8“ thread to mount the camera and 4 screws to take the load off the camera body. The shutter-unit remains in the camera. For that reason, still-photography in Manual Exposure Mode is still possible, by using Live View to focus.
In order to start the camera remotely-controlled, a 3-pin Fischer plug has been built in, so that CMOTION, ARRI and other accessories can also be used. It is still possible to activate the Start/Stop – function by IR – remote control. The Canon EVO collection is THE professional solution. The flange depth of 52,00 mm can also be controlled and adjusted, if necessary.
Any questions regarding this product?
Tel: +49 89 629866-0
CMOS-Sensor - 22,3mm x 14,9mm
Pixel effective - 18,1 Megapixel
Processor - Dual (Digic 4)
ISO-Sensibility - 100 - 6.400 - extendable: 12.800
LCD-Monitor - 3,0 Zoll (7,6cm) TFT 920.000 Pixel non reflecting
Movie type - MOV H.264
Movie size - 24,25 and 30 fps progressive (1920x1080) 50 and 60 fps progressive (1080x720)
Movie length - 29min 59sec